Admissions Open MBBS & BDS 2019 Apply Now

Admissions Open Apply now

icon

Anuj Kumar Sehgal

Assistant Professor, Mechanical Engineering (ME)

anuj.sehgal@sharda.ac.in

About

Dr. Anuj Kumar Sehgal, Assistant Professor in the Department of Mechanical Engineering is expertise in Soft computing and artificial intelligence. He obtained his B.E degree in ME from BMSCE Bangalore, M.Tech from NIET Greater Noida and Ph.D. from National Institute of Technology Kurukshetra. He has published 12+ papers in International Journals and more than 20 paper presented in National and International Conferences. Currently, he is also holding a post of M.Tech Coordinator.

 the department Welfare, Sharda University.

Experience
  • 20 Years
Qualification
  • PhD
  • M.Tech
  • B.E
Award & Recognition

  • Editorial board member in many prestigious publication houses.
  • Marine Engineering Division Head Institute of Engineers Kolkata for Agra Chapter.

Research

  1. Anuj Kumar Sehgal, Vineet Kumar, Nitesh Kumar and Aman Gupta “Assembly of Mechanical Parts in Virtual Environment” pp. 433-440, Advances in Engineering Design, Lecture Notes in Mechanical Engineering (Elsevier).
  2. Chand N.V., Vineet Kumar, Anuj Kumar Sehgal “An Analysis of a Duct with Different Vortex Generators for Performance Enhancement of a Solar Air Heater: Computational Fluid Dynamics (CFD)”. Advances in Fluid and Thermal Engineering. Lecture Notes in Mechanical Engineering. Springer Nature, Springer Singapore, pp 637-645, 2019.
  3. Vineet Kumar, Anuj Kumar Sehgal, Abhishek Gupta “Experimental Investigation on a Solar Thermal Energy Packed Bed Sensible Heat Storage Combined with Latent Heat Storage. Advances in Fluid and Thermal Engineering. Lecture Notes in Mechanical Engineering. Springer Nature, Springer Singapore, pp 647-656, 2019.
  4. Anuj K Sehgal & Meenu, 2017 “Grey relational analysis coupled with principal component analysis to optimize the machining process of ductile iron”, Materials Today Proceeding, Elsevier. https://doi.org/10.1016/j.matpr.2017.11.241
  5. Pandya, P.K. & Sehgal, A.K., 2015 “Dynamic Stress Analysis with Different Boundary Conditions by ISO-Surface behavior”, International Journal of Advanced Engineering, Management and Science, 1(2), pp.2454–1311.
  6. Kumar Rohilla & Sehgal 2015, “Design of a Modified Braking System Mechanism for Two Wheeler Vehicles to Increase Safety of the Rider”, International Journal of Advanced Engineering, Management and Science, 1(3), pp.2454–1311.
  7. Anuj Kumar Sehgal and Meenu., 2014 “Application of Artificial Neural Network in Surface Roughness Prediction considering Mean Square Error as Performance Measure”, National Conference on Synergetic Trends in engineering and Technology and International Journal of Engineering and Technical Research ISSN: 2321-0869, Special Issue.
  8. Anuj Kumar Sehgal and Meenu., 2013 “Optimized Prediction and Modeling Under End Milling Machining by ANOVA And Artificial Neural Network”, International Journal of Engineering Research & Technology, Vol. 2 Issue 3.
  9. Sehgal. A. K and Meenu., 2013 “Application of artificial neural network and response surface methodology for achieving desired surface roughness in end milling process of ductile iron grade 80-55-06”, International Journal of Computational Engineering & Management, Vol. 16, Issue 3.
  10. Meenu, Anuj Kumar Sehgal., 2013. “Surface Roughness Optimization by Response Surface Methodology and Particle Swarm Optimization”, International Journal of Engineering Science and Technology", Vol.5 Issue 7.
  11. A.K Sehgal, Meenu, Anuj Agarwal., 2012 “Computer Aided process planning technique in casting industries: an overview”, International Journal of Engineering Research & Technology Vol.2, Issue 1.

INTERNATIONAL CONFERENCES:

  1. Assembly of Mechanical Part in Virtual Environment, Accepted for the international conference FLAME-2018 (03-05 Oct, 2018), Amity University.(Publication under Scopus Indexed proceedings)
  2. Experimental Investigation On A Solar Thermal Energy Packed Bed Sensible Heat Storage Combined With Latent Heat Storage, Accepted for the international conference FLAME-2018 (03-05 Oct, 2018), Amity University.(Publication under Scopus Indexed proceedings)
  3. An Analysis Of A Duct With Different Vortex Generators For Performance Enhancement Of A Solar Air Heater Using CFD, Accepted for the international conference FLAME-2018 (03-05 Oct, 2018), Amity University.(Publication under Scopus Indexed proceedings)
  4. Anuj K Sehgal & Meenu, “Grey relational analysis coupled with principal component analysis to optimize the machining process of ductile iron” International Conference on Processing of Materials, Minerals and Energy, 2016.
  5. Anuj Kumar Sehgal, Meenu, Balraj Gupta et al., “Modeling of Surface roughness for End Milling of Rolled Aluminium by ANOVA and Artificial Neural Network”, International Conference on Agile Manufacturing Systems, Approach for enhancing Agility of organizations and processes, sponsored by ISAM and ISPE, pp. 87-94, ISBN978-81-8487-200-2, Faculty of Engineering, Dayalbagh Educational Institute, Agra, 2011.
  6. A.K Sehgal, Amit Agarwal, Anuj Agarwal “Surface Roughness optimization in an end milling operation based on Taguchi Design of Experiment” , International Conference on Advances In Industrial Engineering Application, ICAIEA 2010, Anna University, January 6- 8, 2010, Chennai.
  7. A.K Sehgal “ Flash Evaporation Water Production System: An Alternative ” , International Conference in collaborations with International Sociological Association RC-24 & EU, Department of Sociology, S.R.K Firozabad U.P., 28-30 June 2009, Firozabad (UP).
  8. A.K Sehgal “ Role of Mechanical Engineers To Combat Marine Pollution By Utilizing Centrifuge Method”, International Conference in collaborations with International Sociological Association RC-24 & EU, Department of Sociology, S.R.K Firozabad (U.P.), 28-30 June 2009, Firozabad (UP).
  9. A.K Sehgal , Pankaj Gupta “ Role of Mechanical Engineers To Combat Marine Pollution”, International Conference on Electromagnetic Studies related to Earthquakes and Volcanoes (IWEMSEV – 2006), November 20-22, 2006, Hotel Holiday Inn, Agra (UP).

NATIONAL CONFERENCES:

  1. A.K Sehgal, Meenu, “Application of Artificial Neural Network in Surface Roughness Prediction considering Mean Square Error as Performance Measure, National Conference on “Synergetic Trends in Engineering and Technology: Impact on Industry and Society (STET-2014), 25-26 April 2014, Eshan College of Engineering, Mathura.
  2. A.K Sehgal, “Optimization of Surface Roughness in an End Milling Operation based on Taguchi Design of Experiment”, National Conference on Artificial Intelligence & its Applications, AIA -2009
  3. Department of Computer Science and Technology, 12- 13 September, FET, RBS College, Agra (UP).
  4. Anuj Kumar Sehgal & Dr. G.Srivastava, “Enhancing the Performance of a Gas Turbine Integrating Evaporative Cooling of Intake Air with Alternative Regenerator Arrangement” Proceedings of the National Conference on Emerging Trends in Mechanical Engineering ETME –2009, ISBN978-93-80043-39-5, Madan Mohan Malviya Engineering College, 12-13October,2009, Gorakhpur (UP).
  5. A.K. Sehgal, Pankaj Upadhyay et al, “Surface Roughness optimization in an end milling operation based on Taguchi Design of Experiment” Proceedings of the National Conference on Emerging Trends in Mechanical Engineering ETME – 2009, ISBN 978-93-80043-39-5, Madan Mohan Malviya Engineering College, 12-13 October, 2009, Gorakhpur (U.P.).
  6. A.K Sehgal, Anuj Agarwal, “Optimization By Applying Utility Concept Coupled With Taguchi Method” Proceedings of the National Conference on Recent Advances in Mechanical Engineering RAME- 2011, ISBN 978-81-906515-3-0, B.S.A College of Engineering & Technology, 25–26 March, 2011, Mathura (U.P).
  7. A.K Sehgal, Anuj Agarwal, Dr. Meenu, “Optimization & Analysis of Welding Operation Parameters for achieving the Highest Weld - Strength by using Taguchi Design of Experiment” Proceedings of the National Conference on Emerging Vistas of Mechanical Engineering in 21st century EVME-2011, ISBN 978-81-8487-141-8, Anand Engineering College ( S.G.I), 4-5 April, 2011, Agra (U.P).
  8. A.K Sehgal, Anuj Agarwal, “Optimization & Regression modeling of Welding Operation Parameters for achieving the Highest Weld - Strength by using Taguchi Design of Experiment” Proceedings of the National Conference on Advanced Technology in Mechanical Engineering, ATME2011, Nagaji Institute of Technology, 31 March-01 April, 2011, Gwalior (M.P).
  9. Saurabh, A.K Sehgal, “An Approach to Selection Procedure and Analysis of Lubricating Oils in Marine Engines” National Conference on Emerging Vistas of Mechanical Engineering in 21st century EVME-2011, Anand Engineering College ( S.G.I), 4-5 April, 2011, Agra (U.P).

BOOKS PUBLISHED:

A textbook THERMODYNAMICSby Anuj Kumar Sehgal, Amit Agarwal & Pankaj Upadhyay, Satya Prakashan, New Delhi, 2011 (ISBN: 81-7684-615-5)

Certifications

  • Certificate of Competency as Marine Engineering Officer Class IV & III (Motor), Merchant Shipping Act, and the International Convention on Standards for Unlimited Power in Motor and Watch keeping for Seafarers, 1978, as ships only, by Government of Hong Kong (China).

Area of Interest

  • Design of experiments, Machine Learning, Modeling and optimization