Dr. Vineet Kumar

About

Dr. Vineet Kumar is currently working as an Associate Professor in the Department of Mechanical Engineering at Sharda University Greater Noida (UP). from July 2011 to January 2022. He did his Ph.D. in “Computational and Experimental Analysis of Parts in 3D Printing” from the Department of Mechanical Engineering, Jamia Millia Islamia New Delhi, M.Tech in Production Engineering from Motilal Nehru National Institute of Technology, Allahabad, UP (INDIA), and B.Tech in Mechanical Engineering, Uttar Pradesh Technical  University, Lucknow UP, India.

Experience

• Associate Professor, Department of Mechanical Engineering, Sharda University, from January 2022.
• Assistant Professor, Department of Mechanical Engineering, Sharda University, Greater Noida, 4 July 2011 to 1 January 2022
• Lecturer, VIET Dadri, UP, January 2007-July2009
   

Qualification

• Ph.D from Jamia Millia Islamia, New Delhi
• M.Tech MNNIT Allahabad, UP, India
• B.Tech UPTU Lucknow, UP, India

Award & Recognition

• Design patent granted- 01
  (Patent Number N-DL26692176754861T)
• MHRD Fellowship during M.Tech  2009-2011
• GATE Qualified in year 2007, 2009,2013
   

Research

• Bakhtari, A. R., Kumar, V., Waris, M. M., Sanin, C., & Szczerbicki, E. (2020). Industry 4.0 Implementation Challenges in Manufacturing Industries: an Interpretive Structural Modelling Approach. Procedia Computer Science, 176, 2384-2393
• Vineet Kumar, Ahmad Reshad Bakhtari, Comparative Analysis of Femure Bones Compatible Materials by Finite Element Analysis (FEA) Tool, Advances in Engineering Design, (pp. 507-508). Springer, Singapore
• Waseem Akhtar, Bhim Singh, and Vineet Kumar Lean Implementation Barriers in Indian MSMEs An Interpretive Structural Modeling , Recent Advances in Mechanical Engineering RAME2020, Springer
• Kumar, V., Sehgal, A. K., & Gupta, A. (2019). Experimental Investigation on a Solar Thermal Energy Packed Bed Sensible Heat Storage Combined with Latent Heat Storage. In Advances in Fluid and Thermal Engineering (pp. 647-656). Springer, Singapore.
• Chand, N. V., Kumar, V., & Sehgal, A. K. (2019). An Analysis of a Duct with Different Vortex Generators for Performance Enhancement of a Solar Air Heater: Computational Fluid Dynamics (CFD). In Advances in Fluid and Thermal Engineering(pp. 637-645). Springer, Singapore
• Sehgal, A. K., Kumar, V., Kumar, N., & Gupta, A. (2019). Assembly of Mechanical Parts in Virtual Environment. In Advances in Engineering Design (pp. 433-440). Springer, Singapore
• Kumar, L., Shuaib, M., Tanveer, Q., Kumar, V., Javaid, M., & Haleem, A. (2018). 3 D scanner integration with product development. Int J Eng Technol, 7(2), 220-225.
• Haleem, A., Kumar, V., & Kumar, L. Mathematical Modelling & Pressure Drop Analysis of Fused Deposition Modelling Feed Wire.
• Kumar, L., Haleem, A., Tanveer, Q., Javaid, M., Shuaib, M., & Kumar, V. (2017). Rapid manufacturing: classification and recent development. International Journal of Advanced Engineering Research and Science, 4(3).
• Haleem, A., Kumar, V., & Kumar, L. Mathematical Modelling & Pressure Drop Analysis of Fused Deposition Modelling Feed Wire.
• Kumar, V., & Haleem, A. (2016). Design and Development of Thermal Rapid Prototyping Machine and Its Application. Int J Emerg Technol Eng Res (IJETER), 4, 101-106
• Kumar, L., Kumar, V., & Haleem, A. (2016). Rapid Prototyping Technology for New Product Development. IJISET-International Journal of Innovative Science, Engineering & Technology, 3(1), 287-292.
• Kumar, V., Kumar, L., & Haleem, A. (2016). Selection of rapid Prototyping technology using an ANP based approach. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 13(4), 71-78.
• Kumar, L., Tanveer, Q., Kumar, V., Javaid, M., & Haleem, A. (2016). Developing low cost 3 D printer. Int J Appl Sci Eng Res, 5(6), 433-447
• Kumar, V., Kumar, L., & Haleem, A. (2016). Rapid prototyping technology ranking using an ANP approach and its sensitivity analysis. International Journal of Engineering Sciences & Research Technology, 5(9), 93-103.
• Jaiswal, S. K., Sharma, T., Rajesh, M., & Kumar, V. Study of the Hardness and the Microstructure of AISI 1050 Medium Carbon Steel after Heat Treatment Processes.
• Javaid, M., Kumar, L., Kumar, V., & Haleem, A. (2015). Product design and development using polyjet rapid prototyping technology. Control Theory Inf, 5(3), 12-20.
• Kumar, L., Kumar, V., & Haleem, A. (2016). Rapid Prototyping Technology for New Product Development. IJISET-International Journal of Innovative Science, Engineering & Technology, 3(1), 287-292.
• Kumar, L., Kumar, V., & Haleem, A. (2016). Rapid Prototyping Technology for New Product Development. IJISET-International Journal of Innovative Science, Engineering & Technology, 3(1), 287-292.
• Jaiswal, S. K., Sharma, T., Rajesh, M., & Kumar, V. Study the effect of the hardness & microstructure of sample grade of AISI 1050 medium carbon steel EN-9 after treatment processes such as Annealing, hardening & Nornalizing.

TRAINING/WORKSHOP

• 6-Days online Faculty Development Program on “Emerging Trends in Mechanical Engineering” organized by the Department of Mechanical Engineering of School of Engineering and Technology, Sharda University, Greater Noida, India from 21st to 26th June 2021.
• One week one line faculty development program on “ Emerging Trends in Refrigeration & Air conditioning ( 01 June 2020 to 06 June 2020)
•  Faculty awareness program on Outcome Based Education and NBA A accreditation ( 18 May 2020) 
• Five days online National Level Faculty Development Program on  Statistical Applications  Using SPSS Software( 24-28 May 2020)
• A Three day Faculty Development Program on Outcome based Teaching Learning and Research held at Sharda University , Greater Noida during July 11-13,2018.
• Faculty Development Programme on Values and Ethics organized by SET, Sharda University from 9th to 18 August 2017.
• One month FDP in Sharda University Greater Noida from 04th July-2011 to 29th July 2011
• Workshop and training on Computational Fluid Dynamics at Amity University Noida from 20th June to 5th July 2016.
• Faculty development on “Applications of thermal Engineering” sponsored by Dr. A.P.J. Abdul kalam technical University, Lucknow,UP, from 20th February to 24th February 2017, organized by Department of Mechanical Engineering at Galgotias College of Engineering&Technology, Greater Noida.
• One day Faculty development programme on HAVAC on 29th april 2016, Sharda University Greater Noida, UP.
• Faculty development programme on Mechatronics from 30 may to 4th June 2016, IIMT Greater Noida UP

Funded Project

• Awarded Seed Fund of Rs 1,96,750/- by Sharda University (SUSF2002/27) in June 2021 for the project titled “Prototype Design and Development of Rain Gun System ”.

Certifications

• Life time Membership, The Institution of Engineers, India (Membership Number M-1728290)
• SAEINDIA, Society of Automotive Engineers India ( Membership Number 7230310035)
• Lifetime Membership, IAENG International Association of Engineers
• (Membership Number: 278992)
• AUTO CAD 
• PRO-E Certification Course

Area of Interest

• Machining Science
• Additive Manufacturing 
• SOM, FEM, Thermal Engineering
• CFD, AHP, ANP