Dr. Sudesh Singh

About

Dr. Singh has completed B.Tech. in Mechanical Engineering from UPTU and M.Tech. from NIFFT Ranchi. He was awarded the degree of Ph.D. (Mechanical Engineering) from IIT (BHU) Varanasi in the area of Tribology on September 2020. Since October 2020, He is working in the Department of Mechanical Engineering, SSET, Sharda University as an Assistant Professor. He has worked in the State Key Laboratory of Tribology (SKLT), Tsinghua University, Beijing, China for more than 2 years. He has attended several Faculty Development Programs (National and International) and published several research articles in peer-reviewed journals.

Experience

• Senior Scholar at State Key Laboratory of Tribology (SKLT), Tsinghua University, Beijing, PR China from May 2018 to August 2019 and September 2016 to September 2017.
• Visiting Scholar at SKLT, Tsinghua University, Beijing, PR China from May 2016 to July 2016.
• Lecturer at Axis Institute of Technology and Management, Kanpur from August 2012 to January 2013.

Qualification

• Ph.D. on the topic “Studies on Tribological Behavior of Graphene as a Lubricant” from IIT (BHU), Varanasi in 2020.
• M.Tech. in Foundry-Forge Technology (Mechanical) from NIFFT, Ranchi in 2015.
• B.Tech. in Mechanical Engineering from UPTU, Lucknow in 2012.

Award & Recognition

• Chaired a technical session at the International Conference on Cutting Edges in Mechanical Engineering - 2020 organized by Greater Noida Institute of Technology, India.
• Reviewer of the various international journal like Journal of Engineering Research, Materials Today: Proceedings, Journal of Materials Engineering and Performance, Material Science Research India, American Journal of Applied Sciences, Engineered Science, Research on Engineering Structures and Materials etc.
• Edited volume no. 1168 (2021) of IOP Conference Series: Materials Science and Engineering (Online ISSN: 1757-899X; Print ISSN: 1757-8981).
   

Research

JOURNAL PUBLICATIONS

• Nautiyal H., Gautam R. K. S., Singh S., Goswami R., Gautam G., Raturi A., Khatri O. P., Tyagi R., 2023. Influence of Sintering Temperature on Mechanical and Tribological Characteristics of Copper Based Composite Reinforced by 2D Hybrid Material. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (accepted).
• Singh S., Yadav S., Kumar A., 2022. Improvement of Nodularity Value of Graphite in Ductile Iron and its Effect on Mechanical Properties. Macromolecular Symposia, 407(1), 2200118. 
• Das S. S., Raja A. R., Nautiyal H., Gautam R. K. S., Jha P., Sharma J., Singh S., 2022. A review on Aluminium matrix composites synthesized by FSP. Macromolecular Symposia, 407(1), 2200119.
• Nautiyal H., Tyagi R., Verma P., Singh S., Walia R. S., & Khatri O. P., 2022. Tribological Performance Assessment of Porous Copper-Based Composite under Dry and Lubricated Conditions. Journal of Materials Engineering and Performance, 31(6), 4836-4847.
• Inuwa H. M., Ravi Raja, A., Kumar A., Singh B., Singh S., 2022. Status of Industry 4.0 applications in Healthcare 4.0 and Pharma 4.0.  Materials Today: Proceedings, 62(6), 3593-3598.
• Singh S., Chen X., Zhang C., Gautam, R. K. Tyagi, R., and Luo J., 2020. Tribological performance of steel with multi-layer graphene grown by low-pressure CVD. Journal of Tribology, 142, pp. 122101 (1-10). 
• Singh S., Chen X., Zhang C., Gautam R. K., Tyagi R., and Luo J., 2020. Nickel-catalyzed direct growth of graphene on bearing steel (GCr15) by thermal chemical vapor deposition and its tribological behavior. Applied Surface Science, 502, pp. 144135 (1-10). 
• Sahu P. K., Singh S., Chen G., Yijun L., Zhang S., and Shi Q., 2020. Wear behavior of the friction stir alloyed AZ31 Mg at different volume fractions of Al particles reinforcement and its enhanced quality attributes. Tribology International, pp. 106268 (1-12). 
• Singh S., Chen X., Zhang C., Tyagi R., and Luo J., 2019. Investigation on the lubrication potential of graphene oxide aqueous dispersion for self-mated stainless steel tribo-pair. Vacuum, 166, pp. 307-315.
• Singh S., Verma, P., Gautam R. K., and Tyagi R., 2021. Effect of Counterface Materials on Friction and Wear of Graphene-Coated Steel under Dry Sliding Contact. Materials Today: Proceedings, 47 (19), 6660-6663.
• Husain Q.S., Sharma D., Singh V., Varshney G., Bhati G., Singh S., and Raja A.R., 2021. Application of thermal spraying process in advancement of welding technology. IOP Conference Series: Materials Science and Engineering, 1168, 012021. 
• Raja A.R., Dixit A., Jain A., Husain S.Q., Varshney G., and Singh S., 2021. Estimation of temperature during TIG welding of Titanium. IOP Conference Series: Materials Science and Engineering, 1168, 012023.
• Moharana R., Sengar S.S., Badhan B., Rao U.S., Gautam R.K. and Tyagi R., 2019. Tribological Behaviour of Graphene Coated Bearing Steel (EN31). Journal of Physics: Conference Series, 1240 (1), pp. 012040.

BOOK CHAPTERS

• Das R., Ojha R. S., Kumar V., Singh S., 2022, Design of air conditioning system for a residential building: a review. Proceeding of the 2nd International Conference on TECHNOLOGY INNOVATIONS IN MECHANICAL ENGINEERING. ISBN No.- 978-93-92787-18-8.
   

Certifications

• Certified as Trainer by TVSM under the :Train the Trainer Program”

Area of Interest

• Materials Development
• Tribology
• Composites and Coatings
•  Lubrication
• Surface Engineering
• 2D materials (Graphene)
• Friction Stir Welding/Processing