Dr. Lavish Kumar Singh

About

Dr. Lavish Kumar Singh has completed his B. Tech. in Mechanical Engineering from NIT Patna in 2012 (CGPA: 8.87) and M. Tech. from NIT Calicut (CGPA: 9.13) in 2014. Subsequently, he completed his Ph.D. from IIT Kharagpur and then, joined Sharda University as Assistant Professor. He has more than 30 publications in different SCI/Scopus indexed journals. Dr. Singh has also presented his research work in several reputed conferences held in different IITs and abroad (Ireland and USA).

Experience

• Assistant Professor, Department of Mechanical Engineering, Sharda University (January 2020 – continuing)
• Visiting Faculty, Institution of Engineers (India), Kharagpur Chapter (June 2017- June 2019)
• Senior Research Fellow, IIT Kharagpur (May 2014 – June 2016)
   

Qualification

• Ph.D. on the topic ‘Synthesis and Evaluation of Multi-Scale Mechanical Properties of Spark Plasma Sintered Bimodal Al-CNT Nanocomposites from IIT Kharagpur in 2019
• M. Tech. in Mechanical Engineering from NIT Calicut with CGPA 9.13 in 2014
• B.Tech. in Mechanical Engineering from NIT Patna with CGPA 8.87 in 2012
   

Award & Recognition

• Cleared AIEEE, GATE and CSIR NET (AIR 262), all in the 1st attempt
• Awarded 1st prize in Oral presentation on the occasion of Research Scholars Day at IIT Kharagpur in 2016
• Awarded 1st prize in Poster presentation on the occasion of Research Scholars Day at IIT Kharagpur in 2016
• Awarded 3rd prize in Oral presentation on the occasion of Research Scholars Day at IIT Kharagpur in 2017
• Delivered a 10-min talk on धातु-कर्म विज्ञान: चुनौतियाँ एवं संभावनाएं in Akashvani Bhawan, All India Radio, which was aired throughout the nation on 12th April 2022
• Ph.D. Guidance: 01 (thesis submitted) and 02 are under progress
   

Research

• Lavish K. Singh, Ram S. Maurya, Anway Maiti and Tapas Laha. Al Based Nanocomposites Reinforced with Physically Functionalized Carbon Nanotubes Synthesized via Spark Plasma Sintering. International Colloquium on Materials, Manufacturing and Metrology, IIT Madras 132-135, 2014.
• Lavish Kumar Singh, A. Srinivasan, U. T. S. Pillai, M. A. Joseph and B. C. Pai. The Effect of Yttrium Addition on the Microstructure and Mechanical Properties of Mg Alloys. Transactions of the Indian Institute of Metals 68, 331-339, 2015. (Impact Factor- 1.5)
• Lavish K. Singh, Anway Maiti, Ram S. Maurya and Tapas Laha. Al Alloy Nanocomposite Reinforced with Physically Functionalized Carbon Nanotubes Synthesized via Spark Plasma Sintering. Materials and Manufacturing Processes 31, 733-738, 2016. (Impact Factor- 4.6)
• Alok Bhadauria, Lavish Kumar Singh, Atul Ramesh Ballal and R. Vijay. Effect of Yttria Dispersion on Creep Properties of Pure Iron. Transactions of the Indian Institute of Metals 69, 253-259, 2016. (Impact Factor- 1.5)
• Lavish Kumar Singh, Prince Joseph, Amirthalingam Srinivasan, Uma Thanu Subramonia Pillai and Bellambettu Chandrasekhara Pai. Microstructure and mechanical properties of gadolinium- and misch metal-added Mg–Al alloy. Rare Metals, 2017. (Impact Factor- 4.0)
• Lavish Kumar Singh, Alok Bhadauria, Amirthalingam Srinivasan, Uma Thanu Subramonia Pillai and Bellambettu Chandrasekhara Pai. Effects of gadolinium addition on the microstructure and mechanical properties of Mg–9Al alloy. International Journal of Minerals, Metallurgy and Materials 24, 901-908, 2017. (Impact Factor- 2.2)
• Alok Bhadauria, Lavish K. Singh and Tapas Laha. Effect of physio-chemically functionalized graphene nanoplatelet reinforcement on tensile properties of aluminum nanocomposite synthesized via spark plasma sintering. Journal of Alloys and Compounds 748, 783-793, 2018. (Impact Factor- 5.3)
• Lavish K. Singh, Alok Bhadauria, Subhodeep Jana and Tapas Laha. Effect of Sintering Temperature and Heating Rate on Crystallite Size, Densification Behaviour and Mechanical Properties of Al-MWCNT Nanocomposite Consolidated via Spark Plasma Sintering. Acta Metallurgica Sinica (English Letters) 31, 1019-1030, 2018. (Impact Factor- 2.8)
• Lavish K. Singh, Alok Bhadauria and Tapas Laha. Al-MWCNT nanocomposite synthesized via spark plasma sintering: effect of powder milling and reinforcement addition on sintering kinetics and mechanical properties. Journal of Materials Research and Technology 8, 503-512, 2019. (Impact Factor- 5.0)
• Lavish K. Singh, Alok Bhadauria, Akash Oraon and Tapas Laha. Spark plasma sintered Al-0.5 wt% MWCNT nanocomposite: Effect of sintering pressure on the densification behavior and multi-scale mechanical properties. Diamond & Related Materials 91, 144-155, 2019. (Impact Factor- 3.3)
• Wahida R. Ilaham, Lavish K. Singh and Tapas Laha. Effect of Si addition on the microstructure and mechanical property of nanostructured oxide dispersion strengthened ferritic steel synthesized via mechanical alloying and spark plasma sintering. Fusion Engineering and Design 138, 303-312, 2019. (Impact Factor- 1.5)
• Alok Bhadauria, Lavish K. Singh and Tapas Laha. Combined strengthening effect of nanocrystalline matrix and graphene nanoplatelet reinforcement on the mechanical properties of spark plasma sintered aluminum based nanocomposites. Materials Science & Engineering A 749, 14-26, 2019. (Impact Factor- 5.2)
• Alok Bhadauria, Lavish K. Singh and Tapas Laha. Nanoindentation and nanoscratch properties of graphene nanoplatelets reinforced spark plasma sintered aluminium-based nanocomposite. Advances in Materials and Processing Technologies 5, 295-302, 2019.
• Lavish K. Singh, Alok Bhadauria and Tapas Laha. Comparing the strengthening efficiency of multiwalled carbon nanotubes and graphene nanoplatelets in aluminum matrix. Powder Technology 356, 1059-1076, 2019. (Impact Factor- 5.1)
• Alok Bhadauria, Lavish K. Singh, Sapan Kumar Nayak and Tapas Laha. Tensile deformation behavior and strengthening mechanism in graphene nanoplatelet reinforced bimodal grained aluminum nanocomposite synthesized by spark plasma sintering and hot rolling. Materials Characterization 168, 110568, 2020. (Impact Factor- 4.3)
• Shailendra Kumar Chaurasia, Nishant Kumar Singh and Lavish Kumar Singh. Shorea Robusta (Sal): A Novel Feedstock for Bio Based Lubricant Application with Effect of SiO2 Nanoparticles. Journal of Bio- and Tribo-Corrosion 6, 110, 2020.
• Shailendra Kumar Chaurasia, Nishant Kumar Singh and Lavish Kumar Singh. Friction and wear behaviour of chemically modified Sal (Shorea Robusta) oil for bio based lubricant application with effect of CuO nanoparticles. Fuel 282, 118762, 2020. (Impact Factor- 6.6)
• Lavish K. Singh, Alok Bhadauria and Tapas Laha. Understanding the effect of bimodal microstructure on the strength–ductility synergy of Al–CNT nanocomposites. Journal of Materials Science 56, 1730-1748, 2021. (Impact Factor- 4.2)
• Wahida R. Ilaham, Lavish K. Singh, Anil Kumar and Tapas Laha. Effect of thermomechanical treatment on the microstructure and mechanical properties of Si-containing oxide dispersion strengthened reduced activation ferritic steel synthesized via mechanical alloying and spark plasma sintering. Journal of Nuclear Materials and Energy 28, 101041, 2021. (Impact Factor- 2.3)
• Ashutosh Sahu, Ram Sajeevan Maurya, Lavish Kumar Singh and Tapas Laha. Analyzing the Efects of Milling and Sintering Parameters on Crystalline Phase Evolution and Mechanical Properties of Al86Ni8Y6 and Al86Ni6Y4.5Co2La1.5 Amorphous Ribbons. Acta Metallurgica Sinica (English Letters) 35, 1043–1054, 2022. (Impact Factor- 2.8)
• A. Maneengam, M. J. Siddique, R. Selvaraj, I. Kakaravada, A. B. Arumugam, L.K. Singh and Nitesh Kumar. Influence of multi-walled carbon nanotubes reinforced honeycomb core on vibration and damping responses of carbon fiber composite sandwich shell structures. Polymer Composites 43, 2073-2088, 2022. (Impact Factor- 3.2)
• S. Muthukumaran, M. Ramarao, S. Shanmugasundaram and Lavish Kumar Singh. Parametric effect and taguchi optimization of cryogenic treatment of strenx steel. Materials Today: Proceedings 66, 725-730, 2022. 
• Mesfin Kebede Kassa, Lavish Kumar Singh, and Ananda Babu Arumugam. Numerical and Experimental Investigation of First Ply Failure Response of Multi-Walled Carbon Nanotubes/Epoxy/Glass Fiber Hybrid Laminated Tapered Curved Composite Panels. Journal of Mechanical Engineering Science 236, 8481-8496, 2022. (Impact Factor- 1.8)
• Bhaskar Chandra Kandpal, Nitin Johri, Lavish Kumar, Anjul Tyagi, Vaibhav Joshi and Ujjwal Gupta. Stir casting technology for magnesium-based metal matrix composites for bio-implants- a review. Materials Today: Proceedings 62, 4579-4525, 2022.
• M Senthilkumar, LK Singh, S Lakshmanan, AM Shanawaz and M Selwin. Study of the Effect on Friction Welded Surface on Copper Aluminium Juncture. Key Engineering Materials 935, 93-98, 2022.
• Bhaskar Chandra Kandpal, Nilesh Ramdas, Lavish Kumar Singh, Mahtab Alam, Brijesh Kumar, Amit Singh Patel and Anand Kumar Yadav. Development and mechanical characterization of LM6/Al2O3/SiC/Graphite metal matrix composites using stir casting. Advances in Materials and Processing Technologies 2022. (DOI: 10.1080/2374068X.2022.2116883)
• KS Panwar, N Johri, BC Kandpal and LK Singh. Analyzing ballistic impact of bullet over laminated test specimen. Materials Today: Proceedings 73, 128-133, 2023.
• Mesfn Kebede Kassa, Addamu Getachew, Lavish Kumar Singh, Paul Praveen Albert and Ananda Babu Arumugam. Dynamic Bending Characterization of Delaminated Epoxy/Glass Fiber Based Hybrid Composite Plate Reinforced with Multi walled Carbon Nanotubes. Journal of Vibration Engineering & Technologies 11, 19-41, 2023. (Impact Factor- 1.9)
• S. Priyadarshini, L.K. Singh, C.K. Kaithwas and S. Soren. A Review on Thermo‐Mechanical Durability of Glass Fiber/Polymer Composites in Water. Macromolecular Symposia 407, 2200124, 2023. 
• K. Arunprasath, P. Amuthakkannan, M. Vijayakumar, R. Sundarakannan, M. Selwin, S. Kavitha and Lavish Kumar Singh. Effect of Mechanical Properties of AL7075/Mica Powder Hybrid Metal Matrix Composite. Materials physics and Mechanics 51, 142-150, 2023.
• B. Ahuja, N. Johri, B.C. Kandpal, L.K. Singh and P.P. Singh. Drilling process parameter optimization of natural fibre reinforced polymer matrix composites. Materials Today: Proceedings 2023 (DOI: 10.1016/j.matpr.2023.02.364)
   

Area of Interest

• Manufacturing Processes
• Microstructural Studies
• Mechanical Testing