Faculty

Dr. Gopal P. Sinha

Qualification

• B.Sc (Mechanical Engineering) -  Bhagalpur University
• PGDBM - XLRI, Jamshedpur
• Ph.D - IIT Kharagpur
• Trainings in different IT-based and Management systems at U.S. Steel, Wharton School of Management, and Center for Bits and Atoms -MIT

Experience

• Worked with Tata Steel, Jamshedpur for 3 decades at all levels of hierarchy up to Head - Operations Research.
• Served CSIR for a decade as Director of CMERI (Central Mechanical Engineering Research Institute), Durgapur and of AIST (Adv. Inst. of Science Training) of HRDC (Human Resources Dev. Ctr.), Ghaziabad 

Achievements

• Recognized by Prime Minister of India for his contributions towards the framing of policies for the National Manufacturing sector
• Recipient of the acclaimed Franz Edelman Award (from TIMS and ORSA) in 1994 and IFROS Award (from Intl. Federation of Operations Research) in 1993
• Recipient of Distinguished Engineer Award from Institution of Engineers in 2000
• Bestowed SAIL Gold Medal from Indian Engineering Congress multiple times in the last decade
• Founding President of Investment Casting Society of India

Dr. Pramod Kumar Sinha

Qualification

• Studied Engineering at Patna University and IIT-Kanpur

Experience

• Over 4 decades of experience in various academic and administrative positions.
• Worked on research project associated to Stress Analysis and Fracture Mechanics of Composites, Applications for Composites and Automation and Error Control of Operations in Railways.

Prof. Bharat B. Gupta

Qualification

• HDR from University of Paris XII France
• Ph. D. in Applied Mechanics from IIT Delhi, India
• M.Sc. Engg. Mech. (with Honours) from AMU Aligarh
• B.Sc. Engg. Mech. (with honours)

Experience

• Teaching experience of 44 years, Research experienece of 40 years
• Held different administrative posts at UTC, France and UFC, France
• Visiting Professor in the Department of Biological Engineering of the University of Technology of Compiègne (UTC), France
• Professor from April 1983 to Sept. 1990 at UTC and from Oct. 1990 to August 2012 as national Professor at the University of Franche-Comte (UFC), France
• Worked as Visiting Professor at University of Bath, UK (under a national research project) during 1990 to 1992; University of Calabria, Italy, 1996-1997; University of Malaya, Malaysia, 2009
• Guided research work of doctoral students in the field of Membrane Processes and its applications to biomedical, food industry, water and wastewater treatment

 Achievements

• Obtained INSERM fellowship (from France) for postdoctoral research
• Has a Patent on the application of pulsating flow in membrane processes
• Member of different international societies, such as ESAO, ISAO, SFT, EMS, GFGP, IMS, CFM and IWRA
• Was invited as keynote speaker and chairman of session in many international conferences in the field of water and wastewater treatment
• Organised Indo-French seminar on emerging technologies for wastewater treatment in 2004 at IIT Delhi, India

Dr. Vijay Gupta

Qualification

• PhD in Aerospace Engineering from University of Minnesota, 1972
• Graduated from I.I.T. Delhi, 1968 with President’s Gold Medal for standing first in order of merit amongst students of all disciplines

Experience

• Vice Chancellor, Lovely Professional University, Jalandhar, 2007 - 2011
• First Director/Vice-Chancellor of PEC University of Technology at Chandigarh, 2005, on deputation from IIT Kanpur
• Department of Aerospace Engineering, IIT Kanpur, 1972 - 2007
  • Took two short sabbaticals for teaching at University of Minnesota, and for heading an Institute at Hyderabad

Dr. R.C. Sachdeva

Qualification:

• Ph.D. (Liverpool University, U.K.) - 1973
• M. Tech. (IIT, Kanpur) - 1968
• B.Sc. (Engg.)Mech. (TIET now Thapar University, Patiala) - 1965

Dr. Nickolay Zosimovich

 Qualification

• Doctorate in Aerospace Engineering from Moscow State Aviation Institute (MAI)

Experience

• Around 22 years of experience in academics and research
• Professor with National Aviation University NAU
• Associate Professor in State University of Agriculture and Ecology, Ukraine

Dr. Subhash Kamal

Qualification

• Ph. D., IIT - Roorkee
• M. Tech. (Thermal Engineering) Gulbarga University, Karnataka
• B. Tech. (Mechanical Engineering) Gulbarga University, Karnataka

Areas of Specializations     

• High Temperature Degradation of Metals and Alloys  
• Hot Corrosion
• Oxidation
• Protective Coatings
• Detonation Gun (D-Gun) Sprayed Coatings

Awards and Honors 

• Best research paper award in the CORCON 2007, International Conference on Corrosion, Organized By NACE International India Section (NIIS) at Hotel Intercontinental The Grand Mumbai during 26th-28th Sept 2007, Paper title: Hot Corrosion behavior of detonation gun sprayed 75Cr3C2-25(80Ni-20Cr) coating in Molten Salt Environment.
• MHRD Scholarship for qualifying in GATE-1994
• QIP Scholarship for pursuing Ph. D at IIT- Roorkee

Prof. Y.V.S. Kumar

Qualification

• Malaviya Regional Engineering College (now, Malaviya National Institute of Technology), University of Rajasthan, Metallurgical Engineering, 1983-88
• Indian Institute of Science, Bangalore, Metallurgical Engineering, 1988-91
• University of Alabama, USA, Metallurgical Engineering, 1991
• Iowa State University, USA, Metallurgical Engineering, Materials Science and Engineering, Higher Education, 1992-98
• Drake University, USA (Self-Study), Civil Law & Higher Education Administration, 1998-2004

Experience

• Professor and Dept. Coordinator, Mech. Eng., SET; Chief Proctor, Sharda University, Greater NOIDA, 2010 - Till Date
• Professor, Mechanical Engineering, Chief Proctor, Galgotias College of Engg. & Tech., Greater NOIDA, Uttar Pradesh, 2009-2010 
• Professor, Industrial & Production Engineering, Mechanical Engineering and Freshman Engineering, College Coordinator (Acad. & Admn.), Prof-in-Charge (Principal’s Office), Chief Editor and Designer - KLCE News, Koneru Lakshmaiah College of Engineering and K.L. University, Andhra Pradesh, 2007-2009
• Iowa State University, U. of Alabama, USDOE’s Ames National Lab., USDOE’s Mineral Resources Inst., Tuscaloosa, National Science Foundation, State of Iowa, USA; Nissan Motors, Daido Steel, Nissan R&D Inc. Japan; IISc, Malaviya REC, Jaipur, India, 1986-2004
• Professional Networking & Visiting Natl. Research & Acad. Institutions, India, 2005-06

Mr. Uma Kant Gupta

Qualification

• Pursuing PhD, from Department of Production Engg. B.I.T Mesra, Ranchi (research topic: “Investigation into Tribological aspects of Precision forming Processes")
• MBA, Faculty of Management Studies (University of Delhi) in 1983
• M. Sc. (Engineering) from Delhi College of Engineering (University of Delhi) in 1979
• B.E. Mechanical from Regional Engineering College, Trichy (Now NIT Trichy ) in 1970

Experience

• Worked as  Associate Professor in Department of Mechanical Engineering , Lingaya’s University, Faridabad from September 2010 till July 2012
• Total Industrial experience of 40 years in Tool Rooms & Training Centres of which 27 years of experience  with  foreign collaboration Tool Rooms
• Worked as General Manager/Principal Director, in  Tool Room & Training Centre established by Ministry of MSME, Govenemnt of India, in collaboration with Goverment of Denmark, Goverment of Italy & Govenment of Jharkhand from December1992 till June 2010 to set up state-of-the-art Tool Rooms & Traning Centres in Delhi , Jamshedpur , Ranchi, and Dumka

Mr. Amit Swamy

 Qualification

• PhD in Medical Engineering – Department of Mechanical Engineering, University of Hull, England, Dec 2007
• Post-graduate research in Mechanical Engineering – University of Hull, England, Nov 2004
• Bachelor in Mechanical Engineering – Nagpur University, India, April 2003
• Diploma in Mechanical Engineering – Mumbai (Bombay) technical, India, June 2000 

Experience

• Associate Professor, Department of Mechanical Engineering, Sharda University
• General Manager Oman division and Head of projects estimation and business analysist operating from Dubai, UAE
• Research Associate / Associate Professor with Rollys-Royce and Department of Mechanical engineering University of Bristol for SuperGEN – II project, UK. 
• The project was funded by Ministry of Power for maintenance and life assessment for Thermal and Nuclear power plants i.e. high temperature and low pressure pipe-lines, nozzles and turbine blades (fixed and movable) by using modern instruments for condition monitoring and also researching on innovative techniques to calculate stresses and strains for physical samples with validated finite element models under static and dynamic loads.

Mr. Banshidhar Choudhary

Qualification

• B.Sc. (Engg.) from RIT (now NIT) Jamshedpur
• M.Sc. (Engg.) from RIT (now NIT) Jamshedpur

Experience

• Served as Assistant Professor in IIMT Engineering College, Meerut; HCST, Agra; ACET, Nagpur
• Served as an Associate Professor in IIMT College of Engineering, Greater Noida; B.I.T., Meerut; and D.I.T., Dehradun.
• Served as a Guest Faculty at RIT, Jamshedpur, Center for Electronics Design & Technology.
• Served as HOD, Mechanical Engineering at IIMTCE, Greater Noida.

Mr. Kumar Prem Jeet

Qualification

• B.Sc (Mechanical Engineering) - BCE ,Patna University (1994)

Experience

• Worked as an Assistant Professor in Mechanical Engineering Department
• Worked with Omni Auto Limited, Jamshedpur for over a decade, serving in various roles up to Manager - Quality Assurance

Mr. Arvind Kulashri

Qualification

• B.Tech in Mechanical Engineering, from Indo Global College of Engineering, 2009
• M.Tech: PEC, University of Technology Chandigarh (M/C Design), 2012

Mr. Atul Sharma

Qualification

• M.E in Industrial Materials and Metallurgy from PEC University of Technology
• B.TECH. in Mechanical Engineering. From Chitkara Institute of Engineering & Technology, Rajpura affiliated to the Punjab Technical University
• Certified ISO 9001:2008 Auditor/Lead Auditor
• Passed an exam of Business English Certificate Preliminary Council of Europe level B1 conducted by University Of Cambridge.

Memberships

• Member of The Institute of Indian Foundrymen (IIF) membership no. M/09113/N/CHA Affiliated to Chandigarh Chapter
• Student member of The Indian Institute of Metals membership no. ST-44185 

Mr. Kaushalendra. Kr.Dubey

Qualification

• M.Tech (H) (Thermal Engg) from  Univ-Jamia Millia Islamia, New Delhi 
• B.E (Mech) from Univ-RGPV, BHOPAL (MP)

Experience

• One year R & D Engnieer in M/S Insta Power Ltd, Gurgaon(HR), India. August-2010 to July-2011